Preparing For Operation; Disposal Of Packaging - EMAK EF 92S/13H Manual Del Usuario

3. PREPARING FOR OPERATION

3.1 UNPACKING AND CONTENT INSPECTION
The self-propelled mower is delivered in a fabric cover (1). Some parts of the machine have been
dismantled for transport at the factory, and they must be installed before operation. The machine is
unpacked and prepared for operation by the dealer as part of pre-sale service.
- After delivery, immediately check to see if the packaged machine is damaged. If there is
damage, notify the carrier. If a claim is not made on time, it cannot be honoured.
- Check to see that the machine is the model you ordered. If it is the wrong model machine,
do not unpack it, and immediately alert the supplier.
After removing the cover, carefully remove the machine from the pallet. This requires preparation of
ramps (2) to avoid damage to parts of the machine. Make sure that there is no shipping damage. Also
unpack all dismantled parts and inspect them.
1. Fabric cover
2. Ramps
3. Grass catcher
4. Documentation
3.1
5. Seat
6. Steering wheel
The basic package includes:
Mower

Steering wheel (6)

Seat (5)

The grass catcher (3) (is partially disassembled in the cardboard box, with a hitch and joining material.

Documentation (4) (packing list, user manual for mower, engine manual, battery manual and service

book)
Ramps (2) are not included with the machine.

3.2 DISPOSAL OF PACKAGING

After unpacking the accessories, make sure you properly dispose of and recycle
the packaging material.Comply with applicable waste disposal laws in the user's
country.
Disposal can be entrusted to a specialized company.
3.3 ASSEMBLING PACKED UNITS
Because it is technical work, your dealer will prepare the mower for operation (according to
the following instructions).
Before starting installation, remove all protective materials, place the mower on a flat surface,
and align the front wheels in forward position.
27