EMAK EF 92S/13H Manual Del Usuario página 55

10. ES STATEMENT OF COMPLIANCE
pursuant to: Council Directive No. 2006/42/EC (Government directive NV 176/2008 Coll.)
Council Directive No. 2004/108/EC
Council Directive No. 2000/14/EC (Government directive NV 9/2002 Coll.)
A. We: Seco GROUP a.s., Šaldova 408/30, Prague 8
branch 02 Jičín, Jungmannova 11
Corporate number: 60193450
B. Mechanical equipment
- name: Riding mower
- model : AJ 92
- serial number:
Description:
The AJ 92 is a four-wheel self propelled lawnmower with Briggs & Stratton motors 3130, 4155 a 7160. The
motor drive is transferred through an electromagnetic clutch using V-belts to the mowing mechanism and
the drive transmission. The mowing mechanism has two blades driven by a double-sided V-belt. The grass
clippings are guided through a chute to the grass catcher or directed to the ground with the deflector. Instead
of collection the mower may perform mulching by blocking the ejection chute and using two additional
blades.
C. Legislation forming the basis for assessment of compliance:
ČSN EN ISO 836+A4, ČSN EN ISO 3767-1,2,3, ISO 11684, ČSN EN ISO 11201,
ČSN EN ISO 12 100-2, Council Directive No. 97/68/EC (2002/88/EC)
D. Assessment of compliance was performed according to the designated procedure in:
- Council Directive No. 2006/42/EC, Article 5, (eqv. §5, para. 2, NV No. 176/2008 Coll.)
- Council Directive No. 2004/108/EC, Article 7, (eqv. §4, para. 1, NV No. 616/2006 Coll.)
- Council Directive No. 2000/14/EC, Annex VIII,(eqv.annex 7, NV No.9/2002 Coll.)
E. Entities participating in the assessment of compliance:
Authorised entity no. 255, Notified entity no. 1016
Státní zkušebna zemědělských, lesnických a potravinářských strojů a.s. (SZZPLS)
Třanovského 622/11, 163 04 Prague 8, Czech Republic
Final Report No. 33 257 and 31 768
F. We confirm that:
- this mechanical equipment defined above complies with the requirements in the above technical regulations
and under normal operating conditions it is s a f e.
- measures have been taken to ensure the compliance of all products introduced to the market with the
technical documentation and the requirements contained in technical regulations.
- guaranteed emission level of acoustic power L
Measured mean values of acoustic power A depending on the engine used:
ENGINE
Briggs & Stratton 3130 POWERBUILT
Briggs & Stratton 4155 POWERBUILT
Briggs & Stratton 7160 INTEK
Technical documentation of the scope required by appendix VII to regulation 2006/42/EC and by appendix VIII
of regulation 2000/14/EC is kept by the manufacturer at the following address:
Seco GROUP a.s.
plant 02 Jičín
Jungmannova 11
506 48 Jičín
In Jičín on 1. 10. 2013
(Government directive NV 616/2006 Coll.)
issue the following statement:
under the supervision of a notified person from LRQA registration number 0088
71 Fenchurch street
London EC3M 4BS, United Kingdom
WA G
Speed (min ) Measured level of acoustic power L
-1
2700±100
2700±100
2700±100
Member of the Board of Directors
of the joint stock company
55
is 100 dB(A)
100
100
100
Bc. Bořek Kučera
[dB(A)]
WA