Mettler Toledo IND570 Manual Del Usuario página 12

Dimensions (l × w × d)
Shipping Weight
Environmental Protection
Operating Environment
Hazardous Areas
AC Input Power
(Harsh and panel-mount
models)
DC Input Power
(Panel-mount models only)
Scale Types & Update Rates
Analog Load Cell Excitation
Voltage
Minimum Sensitivity
1-4 METTLER TOLEDO IND570 Weighing Terminal Installation Manual
IND570 Specifications
Panel Mount: 265 mm × 160 mm × 66.5 mm
(10.4 in. × 6.3 in. × 2.6 in.)
Harsh Environment: 265 mm × 148.4 mm × 163 mm
(10.4 in. × 5.8 in. × 6.4 in.)
3.2 kg (7 lb)
Panel-mount front panel sealing is UL-approved and certified to IP65, type
4x and type 12
IND570 Harsh Environment model: UL-approved and certified to IP69K.
IND570xx: IP65.
All terminal types can be operated at temperatures ranging from −10° to
40° C (14° to 104° F) at 10% to 95% relative humidity non-condensing
Only the IND570xx version is certified for use in environments classified as
Division 2 or Zone 2/22 because of the combustible or explosive
atmospheres in those areas.
Operates at 85–264 VAC, 49–61 Hz, 750 mA
Panel-mount version provides a terminal strip for AC power connections.
Harsh environment version includes a power cord configured for the
country of use. The IND570xx version provides conduit hubs and no power
cord for Canadian and US approved applications, and an open-ended
power cord for ATEX and IECEx approved applications.
Note: When an IND570xx is installed in an area classified as Division 2 or
Zone 2/22, special AC wiring requirements must be met. Refer to document
30205321
Operates at 24 VDC, -15% - +20%, 1.25A
Panel-mount version provides a terminal strip for DC power connections
24VDC input power option not available on the harsh models
Analog load cells, up to Twelve 350-ohm load cells (2 or 3 mV/V). Update
rate > 366 Hz.
or
IDNet High-Precision Line (+12V versions only, including T-Brick cell, M-
Cell, Point-ADC). Update rate determined by IDNet base.
or
SICSpro High-precision platforms that include Advanced Setup Mode.
Update rate approximately 50 Hz.
10 VDC
0.1 microvolts
30205319 | 04| 08/2016