Mettler Toledo IND570 Manual Del Usuario página 40

4. Mark the position of the mounting holes on the vertical surface per the dimensions shown in
2-10 METTLER TOLEDO IND570 Weighing Terminal Installation Manual
C. Carefully rotate the front cover 180 degrees and reattach the two grounding straps to the
two studs near the grip bushings using the two nuts removed in the previous step as
shown in Figure 2-15. Tighten the two nuts.
Figure 2-15: Front Panel and Load Cell Connection Reversed
Figure 2-16 and in Figure 2-17 or by holding the terminal up to the surface and marking
through the bracket holes.
30205319 | 04 | 08/2016