Mettler Toledo IND570 Manual Del Usuario página 50

Figure 2-30 shows the pin assignments and wire colors for the IDNet connector.
2.4.5.4. SICSpro Connections
The IND570 terminal supplies 12 VDC for SICSpro platforms. In the SICSpro version of the IND570
terminal, the cable connection from the platform is made to a connector (Figure 2-29) on the rear
of the IND570 housing. The SICSpro platforms are supplied with a length of cable and a connector
that mates to the connector on the IND570 terminal.
CURRENTLY, THE SICSpro SCALE INTERFACE HAS NOT BEEN CERTIFIED FOR USE WITHIN DIVISION 2 OR ZONE
2/22 HAZARDOUS AREAS.
2-20 METTLER TOLEDO IND570 Weighing Terminal Installation Manual
Figure 2-30: IDNet Connector Pin Assignments
Figure 2-31: SICSpro Connector Location on the Harsh (left) and Panel (right) Enclosures
IDNet connector
Pin Color
P1–A Green
P1–B Blue
P1–C Grey
P1–D Green
P1–E Red
P1–F White
P1–G
P1–H Pink
P1–J Yellow
P1–K Purple
P1–L Black
P1–M Orange
NOTICE
Note
TXD+/RXD+
+30V
+12V
Jumper
RXD1+
RXD–
Ground
TXD–
TXD1–
TSD1+
RXD1–
30205319 | 04 | 08/2016