Mettler Toledo IND570 Manual Del Usuario página 33

3. Repeat for the second clip and slightly lift the cover.
4. Alternative method: Insert the tip of a flat-blade screwdriver into one of the two slots located on
5. Repeat Step 1 for the other slot.
6. After releasing the front panel, lift the bottom of the front panel firmly up and out (Figure 2-5, 1)
30205319 | 04 | 08/2016
Figure 2-2: Opening the Harsh Enclosure, Preferred Method
Figure 2-3: Harsh Enclosure, Cover Released
the bottom of the front panel assembly (see Figure 2-4) and gently push in toward the
enclosure. A "pop" sound is made when the cover is released. Pressing down on the front
cover while pressing in on the clip can help facilitate release of the clip.
Figure 2-4: Opening the Harsh Enclosure
until it completely clears the top edge of the bottom enclosure.
METTLER TOLEDO IND570 Weighing Terminal Installation Manual 2-3