Mettler Toledo IND570 Manual Del Usuario página 29

•
•
•
•
30205319 | 04 | 08/2016
The Service Icon graphic is shown in the system line when specific service events are triggered
in the terminal. Details of what has triggered the Service Icon can be found by pressing the
INFORMATION RECALL softkey
The middle portion of the display is reserved for the weight display. If the auxiliary display
enabled, this area of the display is shared between the weight display and the selection for
auxiliary display (Figure 1-11, Figure 1-12, Figure 1-13). Random data entry is also shown in
the bottom of this area.
Figure 1-11: Small Material Transfer SmartTrac Enabled
o SmartTrac is one of the available options for the auxiliary display. If SmartTrac is disabled,
the weight display area can be shared with the Rate display (Figure 1-12) or DIO status
display (Figure 1-13Figure 1-13).
The Tare display is designed to show the current Tare value and type (pushbutton or preset).
The Tare display can be separately enabled and disabled in Setup.
The Legend display area provides the user with current operational information such as center
of zero status, gross or net mode, etc.
METTLER TOLEDO IND570 Weighing Terminal Installation Manual
and then the SERVICE ICON
Figure 1-12: Rate Display
Figure 1-13: DIO Status Display
softkey.
1-21