Instructions For Use; Initial Start-Up; Mod "C": User Menu. Configuration Of Language, Date, And Time - Fagor evo CONCEPT Instrucciones De Instalación, Uso Y Mantenimiento

5 INSTRUCTIONS FOR USE

PLEASE READ THE INSTRUCTIONS GIVEN IN THIS MANUAL CAREFULLY.
The manual should be kept safely to hand for future reference.
SEE SECTION 2 INFORMATION AND GENERAL WARNINGS.
THIS APPLIANCE IS EXCLUSIVELY FOR PROFESSIONAL USE, AND SHOULD
ONLY BE USED BY QUALIFIED PERSONNEL.
THE MANUFACTURER MAY NOT BE HELD LIABLE FOR ANY PROPERTY
DAMAGE OR PERSONAL INJURY RESULTING FROM THE INCORRECT USE
OR MAINTENANCE OR CAUSED BY FAILURE TO COMPLY WITH THE
STANDARDS AND INSTRUCTIONS PROVIDED.

5.1 Initial start-up

The electrical protection system must be tested before starting the appliance.
The machine must have been installed and/or inspected by qualified personnel, who will start up the
machine for the first time and provide the corresponding operating instructions.
Check that the wash and rinsing arms, the filters and the trays are correctly fitted and in place.

MOD "C": USER MENU. Configuration of language, date, and time.

5.1.1
The machine has a display in which the language, date and time can be configured.
To go to the User Menu, press MENU with the machine switched off (Fig. 9) for 5 seconds.
This takes you to the User Menu with the following options:
CONFIG.
SISTEMA
IDIOMA (LANG) LANGUAGE (LANG) LANGUE (LANG) SPRACHE (LANG) LINGUA (LANG)
ESPAÑOL
INGLES
FRANCES
ALEMAN
ITALIANO
ATRAS
FECHA/HORA
DESAGUAR
NO / SI
PROG.
PREDET.
P1/P2/P3/PL/PG
SOFT→ REGENERACION
NO / SI
TERMOSTOP
NO / SI / ATRAS
HRS→ HRS
40s (30s – 60s)
SALIR
To browse the User Menu, press MENU (Fig. 9) to change the option and START (Fig. 9) to select an
option and enter the different levels.
The default setting of the appliance is English. Go to LANGUAGE (LANG) to change the language. To go
to the User Menu in the LANGUAGE (LANG) option, press START (Fig. 9). Select the required language
by pressing MENU (Fig. 9) as required, and press START (Fig. 9) to confirm.
To configure the date and the time, go to DATE/TIME. With the format DAY/MONTH/YEAR
HOUR/MINUTE (D D
1
digits one by one (the active digit flashes). It is possible to confirm the setting without reaching the last
value, by pressing the START button (Fig. 9) for 3 seconds.
The DRAIN option immediately performs a tank emptying cycle.
The DEFAULT PROGRAM option allows selecting the predefined active program when turning on the
machine (P2 by default).
SYSTEM
CONFIG.
SPANISH
ENGLISH
FRENCH
GERMAN
ITALIAN
BACK
DATE/TIME
DRAIN
NO / YES
DEFAULT
PROGRAM
P1/P2/P3/PL/PG
REGENERATION
NO / YES
THERMOSTOP
NO / YES / BACK
HRS
40s (30s – 60s)
EXIT
/M M /A A H H /m m
2 1 2 1 2 1 2 1
CONFIG.
SISTEME KONFIGUR
ESPAGNOL SPANISCH
ANGLAIS ENGLISCH
FRANCAIS FRANZOSISCH
ALLEMAND
ITALIEN ITALIENISCH
DERRIERE
DATE/HEURE DATA/ZEIT
VIDANGER ABLASSEN
NON / OUI
PROG. PAR STANDARD
DEFAUT PROGRAMM
P1/P2/P3/PL/PG P1/P2/P3/PL/PG
REGENERATION REGENERATION RIGENERAZIONE
NON / OUI
THERMOSTOP THERMOSTOPP
NON / OUI /
DERRIERE
HRS
40s (30s – 60s) 40s (30s – 60s)
SORTIR VERLASSEN
) use the MENU and START buttons (Fig. 9) to change the
2
SYSTEM CONFIG.
SISTEMA
SPAGNOLO
INGLESE
FRANCESE
DEUTSCH TEDESCO
ITALIANO
ZURUCK RITORNO
DATA/ORA
SCARICO
NEIN /JA NO / SI
PROG.
PREDEFIN.
P1/P2/P3/PL/PG
NEIN /JA NO / SI
THERMOSTOP
NEIN /JA / NO / SI /
ZURUCK RITORNO
HRS HRS
40s (30s – 60s)
USCITA
69