Publicidad
Idiomas disponibles
Idiomas disponibles
Alarms
Description
Cause
Connection
E1 - Cooking
interrupted
chamber
between cook-
EN
temperature
ing chamber
probe not
probe and micro
detected
power board
Improper
"plug - socket"
connection of
the probe to the
E2 - Core
core probe
probe not
detected
Needle-shaped
core probe
interrupted/
damaged
Maximum
allowable
E3 - Safety
temperature
thermostat
in the cooking
on
chamber
exceeded
E4 -
Thermal
Motor over-
motor safety
heated
protection
activated
E8 - Display
Temperature
board
on the display
overtemper-
board above
ature
70°C
E9 - Main
Temperature on
micro
the micro power
power board
board above
overtemper-
70°C
ature
E10 -
The tempera-
Automatic
ture in the cook-
washing
ing chamber
cycle cannot
exceeds 90°C
be activated
E11 - Con-
The hood's
densation
power cable is
hood not
not connected
working
to the mains
14
Corrective
Effect
action
Contact
Impossible to
a skilled
start cooking
technician.
Check
that the
It is not
"plug-sock-
possible to
et" connec-
activate a
tion of the
cooking cycle
core probe
with
is correct
the "core
temperature"
Contact
parameter
a skilled
technician.
Oven
Contact
operation
a skilled
deactivated
technician.
Oven
Contact
operation
a skilled
deactivated
technician.
Oven
Contact
operation
a skilled
deactivated
technician.
Oven
Contact
operation
a skilled
deactivated
technician.
Cool the
cooking
chamber:
The automat-
open the
ic washing
door and
cycle does
touch the
not work
symbol
(automatic
cooling is
activated).
Oven opera-
Check that
tion disabled.
the hood is
a cooking
connected
cycle is in
properly to
progress, it is
the mains
completed.
Connection
E12 - Hood
interrupted
conden-
between
sation
condensation
chamber
chamber tem-
temperature
perature probe
probe not
and electronic
working
board
Connection
E13 -
interrupted
Proofer
between proof-
temperature
ing chamber
probe not
probe and micro
detected
power board
Connection
E14 - Hold-
interrupted
ing cabinet
between holding
temperature
chamber probe
probe not
and micro
detected
power board
Mains power
E18 - Black-
supply outage
out
for over one
minute
The display
E20 - Micro
board does not
power board
communicate
not detected
with the micro
power board
Warranty
Any defect affecting the functionality of the appliance which
becomes apparent within one year after purchase will be re-
paired by free repair or replacement provided the appliance has
been used and maintained in accordance with the instructions
and has not been abused or misused in any way. Your statutory
rights are not affected. If the appliance is claimed under war-
ranty, state where and when it was purchased and include proof
of purchase (e.g. receipt).
In line with our policy of continuous product development we
reserve the right to change the product, packaging and docu-
mentation specifications without notice.
Discarding & Environment
When decommissioning the appliance, the product must not
be disposed of with other household waste. Instead, it is your
responsibility to dispose to your waste equipment by handing it
over to a designated collection point. Failure to follow this rule
may be penalized in accordance with applicable regulations on
waste disposal. The separate collection and recycling of your
waste equipment at the time of disposal will help conserve nat-
ural resources and ensure that it is recycled in a manner that
protects human health and the environment.
For more information about where you can drop off your waste
for recycling, please contact your local waste collection compa-
Oven opera-
tion disabled.
Contact
If a cooking
a skilled
cycle is in
technician.
progress, it is
completed.
Cannot start
Contact
the proofing
a skilled
cycle
technician.
Cannot start
Contact
the holding
a skilled
cycle
technician.
Oven opera-
tion disabled.
When the
power supply
is restored,
Reactivate
the display
the cooking
shows the
program
screen of
the cooking
program
currently
running
Upgrade
Contact
the board
a skilled
firmware
technician.
Publicidad
