MIR SPIRODOC Manual De Usuario página 70

ICON
To perform a sleep oximetry test
To perform a 6MWT/ to move on to the walking phase of the test
Tom move on to the recovery phase of the 6MWT
To access spirometry testing type
To perform a Forced Vital Capacity test FVC/search FVC tests in memory
To perform a Slow Vital Capacity test VC/ search VC tests in memory
To perform a Maximum Voluntary Ventilation test MVV/ search MVV tests in memory
To perform a spirometry test with a bronchodilator
Search in memory oximetry tests lasting more than 12 hours
To print via Bluetooth connection
To view the plethysmographic curve in real-time while performing an oximetry test
To check the alarms and alarm thresholds during oximetry testing
To check the alarms and alarm thresholds during oximetry testing when at least one parameter is
turned OFF
Auditory alarm enabled during oximetry test. Press it to pause audio for 2 minutes
Auditory alarm is temporarily paused during oximetry test. Press it to turn the auditory alarm
back ON
Symptoms selection in PATIENT mode
2.7 Service menu
To enter the service menu touch the display when the following icon appears
Insert the PIN; if the PIN is not set insert the default PIN which is the following:
The service menu shows different items according to whether the device is set to either Patient or Doctor mode; The item "Spirodoc
mode" is the first one displayed in both modes. The configuration of the item menus for the two modes is the following:
• Doctor/Patient
• Type of ignition
• Patient DATA
• Set Oximetry
• Set Questions
• Set symptoms
• Personal best
Scroll through the various items of the menu as explained in paragraph 2.1; once the
item of interest is shown touch the corresponding item
2.7.1 Doctor Mode
In Doctor Mode the user has access to all the functions of the device for professional use, unlike Patient Mode which is restricted to a
simplified use of the device. (Please view paragraph 2.7.2).
The following items are those shown in the service menu when in Doctor Mode.
Doctor/Patient
This function allows to set one of the two modes:
•
Patient mode
•
Doctor mode
SPIRODOC
Patient mode
• Theoretical Author
• Standard Setting
• Turbine Type
• Turbine Calibration
• Set Language
• Date Format
• Unit of measurement
• Clear archive
cod. 980156
DESCRIPTION
and keep pressing for a few seconds.
1 2 2 3
Doctor mode
• Doctor/Patient
• Change date/time
• Set LCD
• Set Bluetooth
• Ignition Type
• Set Oximetry
• Theoretical Author
• Set Standard
• Set parameters
• Turbine type
Rev 4.2.1
spirodoc
• Turbine Calibration
• Set language
• Date format
• Units of measurement
• Clear archive
• Security Info
• Firmware Info
• Print Settings
EN 24/48
User manual