Select the desired item by touching the display.
To delete the memory of the device insert the PIN or the default PIN by touching the numbers. The default pin is::
If the password was not properly inserted the message below is shown:
If the user fails to enter the correct password three consecutive times the device will automatically turn off.
If instead the password was properly inserted the message below will be displayed:
After approximately 30 seconds the following message will appear:
The device will now return to the service menu.
Security (or Privacy)
In the "Security" section the user can enable or disable:
the PIN
the Privacy information
The device has a default PIN set, which is the following:
In this section it is possible to change the PIN enabling "Change PIN"
Info firmware
In this menu the user may view the current software version of the following components:
•
Spirodoc
•
Bluetooth
•
Oximeter
After approximately 10 seconds the device will automatically return to the service menu, otherwise touch
Once all of the items in the service menu have been set it is possible to exit the menu by touching
screen.
Print Settings
Select the item by tapping on the display.
You can select between:
•
black/white print
•
colour print.
2.7.2
Patient Mode
Patient mode allows for a simplified use of the device for homecare use by a patient. In this mode the doctor may also set/visualize
certain functions useful to comprehend the state of health of a patient and how it evolves in time.
By touching the
icon for a few seconds the user will access the simplified service menu which is comprised of the following items:
•
Change date/time
•
LCD settings
•
Configuration
•
Bluetooth settings
•
Info firmware
To access the Patient Mode service menu select the item "Configuration" and insert the PIN or the default PIN which is the following:
The service menu will display the following items:
• Doctor/Patient
SPIRODOC
1 2 2 3
Password Error
Press OK to try again
Please wait
erasing memory
Memory deleted
1 2 2 3
1 2 2 3
cod. 980156
Rev 4.2.1
spirodoc
User manual
.
on bottom left side of the
EN 29/48