SKF LINCOLN Centro-Matic P653S Serie Instrucciones De Uso Y Mantenimento página 24

Program pump
Programming mode:
Pump with pressure
switch
Key Function
Key for modifying
parameters in pro-
gramming step
Key Function
Key for switching to
next programming
step
NOTE
Pump power must be on to start
programming.
Display
Press
> 4 sec.
Setting of pause time P1 (hours)
and P2 (minutes)
To access programming mode, press both
buttons at the same time > 4 seconds, so
that P1 appears in display.
Programming options:
P1
P2
minutes
Min. pause time
Max. pause time
minutes
24
Step 1
Display
Press
P1: Setting of hours
When releasing two buttons, currently set
value appears. Example: factory-set value:
1 hour. Hour is indicated by dot on right-
hand side.
Press button.
Settings are made in one direction:
Pause time: 0, 1, 2, 3,.... 59 hours
0 – 59 hours Button pressed once: increase by 1 hour
0 – 59 Button pressed continuously: quick
sequence
4 minutes Example: 12 hours
59 hours 59
Step 2