Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Introductory User Manual
4) Twin NIC (network interface card)
This configuration is a combination of configurations 1 and 3. The S8 TIGER and PC are connected
directly and are allocated IP addresses via APIPA. An additional network card (described as NIC2 in
the Figure) is installed inside the PC and connected to your company network. The PC will now be
able to communicate with your company network and also with the S8 TIGER. However, with this con-
figuration, the S8 TIGER is isolated from your LAN.
Unlike configuration 3, this configuration should not impact on your IT policy when remote diagnosis is
required. If remote diagnosis is required, you will be advised to unplug your PC from your LAN (the
cable plugged into NIC2). This means that remote diagnosis can assist you with any problem you may
have without requiring access to your network.
Advantages
Use of other network devices.
Remote diagnosis should not have an impact
on your IT policy.
PC
Modem cable*
*Modem connected only during remote diagnosis by Bruker AXS Customer
support. Modem may be disconnected during routine operation.
Fig. 1-13:
Twin NIC network configuration
1-28
Disadvantages
May require some initial configuration.
Requires additional network card (NIC)
Company LAN
NIC2
Ethernet cable
NIC1
Ethernet cable
S8 TIGER X-ray Spectrometer
S8
DOC-M80-ZXX031 V4 – 02.2010
Publicidad
Tabla de contenido
