Precautions When Operating In Service Mode - Bruker S8 TIGER Manual De Instrucciones

Introductory User Manual
X-ray tube ON
After a sample has been moved into measurement position, the high-voltage generator is activated.
While the X-ray tube is generating the specified X-ray power, the orange Status LED lights steadily.
Note
After turning on the system, all four illuminated status LEDs will light until the system con-
trol has finished its initialization. After initialization, the green System ON LED lights stead-
ily.

Precautions When Operating in Service Mode

To ensure that the S8 TIGER system operates in a reliable and precise way, preventive maintenance
must be performed at regular intervals as recommended by Bruker AXS.
All repairs, adjustments, and alignments performed on any components of the system must be carried
out only by authorized personnel.
Danger of X-ray radiation, high voltage and moving of mechanical drives due
to remote control via network!
S8 TIGER systems are equipped with an Ethernet network interface. Therefore, they can
be controlled remotely by computers. These can be part of the local company network or
even a wide area network. The implemented safety features of S8 TIGER systems make
sure that the instrument is – at all times – in a safe state during standard operation (with
respect to X-rays, electrical voltages, and mechanical movements). In case of failure, gen-
eration of X-rays and movement of mechanical drives will be stopped immediately.
2-14
S8 TIGER X-ray Spectrometer
DOC-M80-ZXX031 V4 – 02.2010