Illuminated Status Displays - Bruker S8 TIGER Manual De Instrucciones

S8 TIGER X-ray Spectrometer

Illuminated Status Displays

Fig. 2-3: Status display
Measurement Standby mode:
A flashing orange LED indicates that the system is in Measurement Standby mode. The
system is ready and measurements of samples can start immediately.
Ready
System ON:
The green LED indicates that the control electronics and the high-voltage generator are
turned on.
On
Alarm and Warning Display:
The red LED indicates that a system alarm (steady red light) or a system warning (flash-
ing red light) is pending (see section 'Alarms and Warnings' in section 'System Control
Alarm
software).
Measurement is running/Measurement is paused:
The yellow LED indicates that a measurement is being executed (steady yellow light) or
that the current measurement has been cancelled because a physical system component
Busy
is not ready (flashing yellow light).
DOC-M80-ZXX031 V4 – 02.2010
Introductory User Manual
Ready
On
Alarm
Busy
2-13