Bruker S8 TIGER Manual De Instrucciones página 45

S8 TIGER X-ray Spectrometer
Component
Supply Gases (Note: A flow counter and/or the optional helium mode require gas cylinders, P-10 or P-5 and/or
He, and appropriate regulators. Neither gas cylinders or regulators are factory-supplied)
P-10 or P-5:
Cylinder/regulator securely mounted to wall
(near the S8 TIGER)
If mounted farther away than the supplied hose length,
correct tubing/piping line installed
Gas quality is sufficient
Helium:
Cylinder/regulator mounted securely to wall
If mounted farther away than the supplied hose length,
correct tubing/piping line installed
Gas quality is sufficient
External Instrument Cooling (3/4 kW version only):
Open cooling system
Plumbing/piping complete
OR: Closed cooling system
Plumbing/piping complete
Vacuum:
Exhaust to outside (optional)
Final Check
All local safety codes are met
In case of questions or if assistance is needed, call your
local Service Representative
http://www.bruker-axs.com
Support Worldwide
DOC-M80-ZXX031 V4 – 02.2010
-> Support -> Customer
YES/NO Value/remark
Introductory User Manual
1-31