DENTSPLY Multimat 2 Touch Manual De Instrucciones página 53

4.5.4.2 All individual programs
1. Press sensor button "M".
2. Press sensor button "Delete programs".
3. Press sensor button "All individual programs".
4. Confirm the deletion by pressing "C".
All individual programs are deleted.
4.5.4.3 Delete fixed and special programs
The sensor fields of the fixed and special programs cannot be
deleted.
5 Create individual programs
The individual steps until the ceramic selection have already
been described in section 3.4 First operation.
5.1 Firing method
Figure 17: Firing modes menu
Dentsply DeTrey, the furnace changes to this screen:
5.2 Program type
Figure 18: Program types menu
After selecting a
ceramic type, the
firing methods are
displayed. Select
from this screen the
desired firing method
by pressing the
appropriate sensor
button. After selecting
the desired firing
method, e. g.
Select from the dis-
played possibilities by
pressing the appro-
priate sensor button,
e.g. individual pro-
grams. After selecting
the desired program
type, the furnace
changes to the next
screen:
5.3 Program list
Figure 19: Metal ceramics menu
5.4 Text input
Figure 20: Entering characters
Complete the entry by pressing " ". The furnace changes to the
next screen. Different characters are available, depending on the
selected language.
5.5 Firing parameters
Figure 21: Form for entering firing parameters
entered separately. Enter a time of 3 minutes and 20 seconds
as 0320.
Note: The program name can be changed afterwards with the
sensor button "Name".
Use the buttons " "
and " " on the sensor
bar on the bottom of
the screen to scroll
the program list.
Press the button
"NEW" to create a
new program. The
furnace changes to
this screen:
Use the characters
to enter the desired
program name, e. g.
"Test". The entered
text is displayed in
the text window. "Use
the return" button " "
to enter a line break
for double-spaced
names.
Numerical values
are entered with the
numeric keypad.
Note:
For time data, the
colon (:) between
minutes:seconds
and hours:minutes is
a default setting and
needs not to be
53