Descargar Imprimir esta página

Pando PI-3110 Manual De Instalación página 155

Ocultar thumbs Ver también para PI-3110:

Publicidad

Idiomas disponibles

Idiomas disponibles

SOUNDS DURING USE:
• Noises during cooking. Some cookware, depending on the quality of the ferritic base of the
container, may be louder if the composition of the ferritic base is poor or bad.
• A faint "click click" sound is heard. This sound is normal. It is a safety indicator
which detects the presence of the pan on the inductor. It is activated automatically
when the hob is switched on and during cooking.
• A slight humming sound is heard. This is a normal sound that comes from the transmission of
energy from the inductor to the base of the vessel (electromagnetic waves).
If the pan or frying pan is not detected, it is possible that the cookware is not suitable for
induction cooking. The above recommendations should be taken into account to avoid any
problems or inconveniences when cooking.
8. HOW TO USE YOUR INDUCTION HOB
Start of cooking
Press the ON/OFF sensor for three seconds. After switching on, the buzzer beeps and all displays
will show "-" or "- - ", indicating that the induction cooktop has entered standby mode.
Place a suitable container on the cooking zone you wish to use. Set the
desired power level with the power adjustment slider:
If you do not choose a temperature setting within 1 minute, the induction hob will switch off
automatically. You will have to start again at step 1.
You can change the temperature setting at any time
1
WARNING!
The use of unsuitable
containers can
cause malfunction or
breakdown of the
appliance,
which would not be covered
by the manufacturer's
warranty
2
14
3
GB
9
9

Publicidad

loading

Este manual también es adecuado para:

Pi-3111Pi-3150Pi-3151Pi-3210Pi-3211