Publicidad
Idiomas disponibles
Idiomas disponibles
GB
If the display flashes alternately with temperature setting
It means that:
•
You have not placed a frying pan on the correct cooking zone.
•
The frying pan you are using is not suitable for induction cooking.
•
The frying pan is too small or not well centred in the cooking zone.
•
There is no heating unless there is a suitable frying pan in the cooking zone.
•
The display will automatically switch off after 2 minutes if a suitable frying pan is not inserted.
End of cooking
Turn off the cooking zone by moving it to "0" or Press the ON/OFF sensor key for
three seconds.
Beware of hot surfaces
The residual heat indicator will display H indicating which
cooking zone is hot to the touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be
used as an energy saving function if you want to heat more
pans, use the hotplate which is still hot.
Using the Boost function
Activate the booster function
Once the desired power level has been set, press sensor B, the power value
indicator changes and the maximum heating power is reached.
Deactivate the booster function
To cancel the booster function, press sensor B again or slide the
slider to 0.
9
15
9
Publicidad
