Pando PI-3110 Manual De Instalación página 165

14. SPECIFIC TO 3150 - 3151
PROBLEM
E1、E2、E7 Temperature sensor failure
Failure of the temperature sensor of
E3、E4
the
IGBT.
The connection between the display
EU
board and the main board fails, or
touch IC communication fails.
EL/EH
Abnormal supply voltage
Ceramic glass plate temperature
C1
sensor Is high
IGBT temperature sensor
C2
It is high
F5 Fan malfunction
Two or more keys are triggered for an
EF
extended period of time.
15. SPECIFIC FOR 3110-3111
FAULT
CODE
The supply voltage is higher than the
E1
nominal voltage.
Switch on after the power supply
E2
food is normal.
High board sensor temperature
E3
ceramics. （1#）
High board sensor temperature
E4
ceramics. （2#）
E5 High temperature of IGBT. （1#)
E6
High temperature of the IGBT. (2#）
23 - INOXPAN S.L.
POSSIBLE CAUSES
PROBLEM
Automatic recovery
Contact the supplier.
Contact the supplier.
Contact the supplier.
Check if the power supply is normal.
Please restart after the induction hob cools
down.
Contact the supplier.
Clean up of the area of operations
Check if the power supply is normal.
Switch on after the power supply
food is normal.
Wait for the temperature of the ceramic hob
to return to normal.
Touch the "ON/OFF" button to restart the
unit.
Wait for the IGBT temperature to return to
normal.
Touch the "ON/OFF" button to reset the
unit.
Check for any obstruction in the ventilation.
If the problem persists call the service
technical.
24
WHAT TO DO
SOLUTION
GB