Pando PI-3110 Manual De Instalación página 168

GB
FITTING DIMENSIONS MODEL - 3110
Glass on worktop
Glass size
A1
520
The joint between the hob and the worktop must
not be made with sealants or silicone. The use of
such products in the installation may damage the
product and make access or removal difficult f o r
servicing. Damage or costs resulting from non-
compliance will not be covered by the warranty.
covered by the product warranty.
*
**
Size of the cut
B1 C
590 495
Respect the vents described in the images, as failure to do so may result in serious
damage to the product, which would not be covered by the warranty.
Minimum distance
D E
565 50
The perimeter trim must be made with the gasket
included in the product by gluing it to the bottom flange of
the plate 2 mm from the outer edge, after the protective
film has been removed.
*
Separating shelf
for optimal heat
insulation and
ventilation
27
Total
Glass
product
thickness
height
F G H
50 4 60
*Dimensions in mm
**