Publicidad
Smart Programme Settings
Cancel and
Press Cancel to stop a Smart Programme at any time.
The display returns to Standby mode and indicates OFF.
Standby mode
When in Standby mode, press and hold + over Time until the
Turn sound
display indicates S On (sound on) or SOFF (sound off).
On/Off
Note: Error alerts cannot be silenced.
Adjust
When in Standby mode, press and hold + above Temp
temperature
until the display indicates ºF (Fahrenheit) or ºC (Celsius).
The temperature is displayed in the unit indicated.
scale: ºC or ºF
Delay Start may be applied to the Pressure Cook, Slow Cook
and Steam Smart Programmes.
Set Delay Start for a minimum of 10 minutes to a maximum
of 24 hours.
1. Select a Smart Programme and adjust the settings as you
desire, then press
Delay Start.
Note: Once Delay Start has been selected, there is no way to
return to the cooking settings. To adjust Smart Programme
Set a Delay
settings, press Cancel and enter new selections.
Start timer
2. When the timer flashes, use the + / − Time buttons to
adjust the delay time.
E.g., 02:00 indicates that cooking will start after 2 hours.
3. Press Delay Start again to toggle to the minutes field and
follow the same process as the previous step.
4. Press Start to begin.
The timer begins counting down.
5. When Delay Start reaches 00:00 the Smart Programme
begins.
The display indicates On and the cooker starts to Pre-heat.
Keep Warm is on by default on the Pressure Cook, Slow Cook
Automatically
and Steam Smart Programmes.
keep food
To turn automatic warming off, select an applicable Smart
warm after
Programme then press Keep Warm. The LED indicator dims
cooking
to indicate that the setting is off.
20
Smart Programme Settings
Keep Warm may be set from a minimum of 10 minutes to a
maximum of 24 hours.
Reheat food
1. When in Standby, select Keep Warm.
or keep warm
2. Press Keep Warm again to cycle through Lo (Low) and
for long
Hi (High) temperature levels.
3. Use the − / + Time buttons to set a warming timer.
periods
4. Press Start to begin.
5. When Keep Warm completes, the display indicates End.
Applicable to Sous Vide, Air Fry, Roast, Bake, Grill and
Dehydrate Smart Programmes.
1. Select an applicable Smart Programme.
2. Use the − / + Temp buttons to adjust the temperature
in ºF or ºC.
Adjust and
3. Press Start to start the Programme and save the
save custom
temperature.
temperatures
The next time the Smart Programme is selected, the new
temperature is displayed.
When air frying, the cooking temperature may be adjusted
at any time with the − / + Temp buttons. Adjustments made
after cooking begins are not saved.
With the cooker in Standby mode, press and hold one Smart
Reset
Programme button until the cooker returns to Standby, it will
individual
beep and display OFF.
Smart
The Smart Programme's pressure level, cooking time and
Programme
temperature are restored to the factory default setting.
With the cooker in Standby mode, press and hold Cancel
Reset all Smart
until the cooker beeps.
Programmes
All Smart Programme pressure levels, cooking times and
temperatures are restored to the factory default setting.
21
Publicidad
