Hella Gutmann mega macs PC SE Manual De Instrucciones página 133

Hella Gutmann
6. Installation of the mega macs PC SE
6.1. Supported Operating Systems for the mega macs PC SE
• at least Microsoft Windows 10 (32/64 bits) or higher
6.2. System Requirements for the mega macs PC SE
• At least 512 MB free internal memory
• at least 2 GB free hard drive space
• At least 1 free USB port on the PC
• Screen resolution at least 800 x 600
6.3. Installing the mega macs PC SE Software
An installation wizard guides you through the necessary installation steps.
Proceed as follows to install the mega macs PC SE software:
1. Switch on the PC.
2. Insert the supplied pen drive (2) into the USB port on the PC.
ð The mega macs PC SE USB drive opens automatically.
3. Click to >Open folder< and start the file mega_macs_pc.exe.
ð You can also open the USB drive as follows: Start > My Computer > mega macs PC SE.
ð The mega macs PC SEtup window appears.
4. Select the required language and click >OK<.
ð The selection will be saved automatically.
5. Click >Next<.
ð A selection window appears. A target directory for the mega macs PC SE software files is already suggested. If
you wish to have another target directory, you can use the >Search< function to select a suitable directory. At the
end of installation, the files will be copied into the selected target directory.
6. Click >Next<.
7. Click >Install<.
ð Installation is started.
8. Wait until installation is finished.
9. Click to >Finish<.
ð A link to the mega macs PC SE is automatically created on the desktop.
mega macs PC SE
Installation of the mega macs PC SE | 6.
133