Hella Gutmann mega macs PC SE Manual De Instrucciones página 193

Hella Gutmann
12. Confirm the performed service reset with
11.5.5.2. Performing Automatic Service Resets
Proceed as follows to perform the automatic service reset:
1. Perform steps 1 to 11 as described in section Vehicle selection.
CAUTION!
Pulling off of the HG-VCI PC when actuating the clutch
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
NOTICE
Danger of short circuit and voltage peaks when connecting the HG-VCI PC
Danger of destruction of automotive electronics
Switch off ignition before connecting the HG-VCI PC to the vehicle.
2. Connect the HG-VCI PC to the vehicle's diagnostic connection.
ð Both LEDs of the HG-VCI PC flash.
ð The HG-VCI PC is ready for operation.
3. Select Diagnostics > Function > Service reset.
NOTICE
The selection of the following possibilities depends on the selected manufacturer and vehicle type:
- Functions
- Component groups
- Systems
- Data
4. Select the requested system.
5. Observe the info window.
6. Call up the >Information< tab.
mega macs PC SE
.
Working with the mega macs PC SE | 11.
193