Hella Gutmann mega macs PC SE Manual De Instrucciones página 216

12. | Applications
5. Open the virtual keypad with
6. Enter the required value.
7. Confirm your entry with
8. Repeat steps 5 to 7 for further entries where necessary.
ð The calculation result is displayed under Result.
12.4. Calculation
Prepare vehicle-specific cost estimates for the repair time and the costs to be expected.
12.4.1. Performing Cost Estimates
NOTICE
To perform cost estimates, enter at least 1 hourly rate and the VAT rate under Settings > Company > Cost
estimate (see section Creating Cost Estimates).
Proceed as follows to perform a cost estimate:
1. Select >Applications< in the main menu.
2. Select Cost estimates with
3. Add a new cost estimate with
4. Observe the info window.
5. Close the info window with
6. Open the selection window under First registration with
7. Open the list under Day with
8. Select the day of the first registration.
9. Repeat steps 7 and 8 for Month and Year.
10. Confirm the selection with
11. Open the virtual keypad under Odometer reading with
12. Enter the odometer reading.
13. Confirm your entry with
14. Repeat steps 6 to 8 for the Vehicle safety and emissions inspection date.
15. Confirm the selection with
16. Add a new cost estimate with
ð Data download is in progress.
216
.
.
.
.
.
.
.
.
.
.
.
.
Hella Gutmann
mega macs PC SE