Hella Gutmann mega macs PC SE Manual De Instrucciones página 146

10. | Configuring the mega macs PC SE
2. Select >System<.
ð An info window appears.
ð Here you can find information including the software and hardware version and the device number.
10.2.3. Setting the Language
Here you can set the language version if the software is multilingual. After having set the language, the update will be in-
stalled in this language.
Proceed as follows to set the language:
1. Select Settings > Update in the main menu.
2. Select >System<.
3. Open the list under Language setting with
4. Select the requested language.
ð The selection will be saved automatically.
10.2.4. Starting the test
Here you can check the present software for incorrect or missing files.
Proceed as follows to start the test:
1. Select Settings > Update in the main menu.
2. Select >System<.
3. Open the list under Step with
4. Select >Check<.
5. Start the check with
ð Installation is being checked.
ð The delivered list after completion of the installation test must not include an incorrect file.
ð The message Device software OK appears if the present software is OK.
6. Should the list nevertheless include incorrect files, start the update again.
10.2.5. Starting the Software Update
Here you can start the software updates.
Proceed as follows to start the software update:
1. Select Settings > Update in the main menu.
2. Select >System<.
3. Open the list under Step with
146
. The compilation of languages depends on the prevailing software.
.
.
.
Hella Gutmann
mega macs PC SE