Hella Gutmann mega macs PC SE Manual De Instrucciones página 221

Hella Gutmann
8. Repeat steps 6 to 7 for another selection.
9. Open the virtual keypad under Cold cranking amps [A] with
10. Enter a value.
11. Confirm your entry with
12. Push to start the Battery diagnostics.
ð The connection is established and the device searches for the BPC-Tool.
ð The battery test is started.
From here, the system test is controlled using the keys on the BPC-Tool (see operating instructions of the BPC-Tool).
13.1.3. Preconditions for Saving Test Results in the Car History
Ensure the following to save the most recent test results of the system and battery test in the Car History:
• Required vehicle selected in the mega macs PC SE software.
• BPC-Tool on.
• BPC-Tool connected to the mega macs PC SE software.
13.1.4. Saving Test Results in the Car History
Proceed as follows to save the most recent test result from the battery test or system test in the Car History:
1. Select >Optional HGS Tools< in the main menu.
2. Select Battery diagnostics with
3. Select >Import result (system test)< or >Import result (battery test)<.
4. Start the import with
5. Observe the confirmation prompt.
6. Confirm the confirmation prompt with
ð The connection to the BPC-Tool is established.
ð The test results are saved in the Car History.
mega macs PC SE
.
.
.
.
where necessary.
Optional HGS Tools | 13.
221