Hella Gutmann mega macs PC SE Manual De Instrucciones página 191

Hella Gutmann
12. Regard the window with information and instructions.
13. Confirm the window with infos and instructions with
ð Communication to vehicle is being established.
14. Activate the check box for the requested component.
NOTICE
If the vehicle offers the automatic actuator test, all ECUs and actuators connected to them will be automati-
cally actuated one after the other.
The actuator test of a component must be finished completely first before the next test can be started.
15. Observe the info window.
16. Follow the on-screen instructions.
17. Confirm the info window with
18. Push the button indicated.
ð The actuator test is performed.
ð The message Actuator test successfully done. appears if the actuator test was successful.
11.5.5. Service reset
Here you can reset service intervals provided that this function is supported by the vehicle. Here you will find a description
for the manual reset or the mega macs PC SE performs the reset automatically.
11.5.5.1. Performing Manual Service Resets
CAUTION!
Pulling off of the HG-VCI PC when actuating the clutch
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
Proceed as follows to perform the manual service reset:
1. Perform steps 1 to 11 as described in section Vehicle selection.
mega macs PC SE
.
.
Working with the mega macs PC SE | 11.
191