Hella Gutmann mega macs PC SE Manual De Instrucciones página 156

10. | Configuring the mega macs PC SE
ð An info and selection window appears.
ð Deactivate all parameter records with
ð Activate all parameter records with
4. Activate or deactivate the required parameter records.
5. Delete the selected parameter records with
ð The parameter records are deleted.
10.6.2.5. Displaying Error Logs
If an error occurs when sending the Car History data, the error log is stored in the memory of the mega macs PC SE soft-
ware.
Proceed as follows to call up the error log:
1. Select Settings > Miscellaneous.
2. Select >Car History<.
3. Push to call up Error logs.
4. Select the required error log.
ð The error log is displayed.
ð It displays the troubles that occurred while sending the Car History data.
10.6.3. Configuring the Resolution
Configure the screen resolution of the mega macs PC SE software here.
Proceed as follows to set the resolution:
1. Select Settings > Miscellaneous.
2. Select the >Resolution< tab.
3. Open the list under Resolution with
4. Select the requested resolution.
5. Regard the window with information and instructions.
6. Close the window with infos and instructions with
ð The selection will be saved automatically. The mega macs PC SE software will be restarted.
10.7. Contracts
Here you can see the general terms and conditions as well as the licenses and notes of the programs and functions used
by the Hella Gutmann Solutions GmbH.
156
.
.
.
.
.
Hella Gutmann
mega macs PC SE