Hella Gutmann mega macs PC SE Manual De Instrucciones página 181

Hella Gutmann
• >Basic settings<
Here you can assign basic setting values to ECUs and actuators.
• >Codings<
Here you can code tasks to actuators and ECUs and you can adapt new components to the vehicle.
• >Test function<
Here the device evaluates and depicts the performance of the individual cylinders.
11.5.1. Preparing Vehicle Diagnostics
The selection of the correct vehicle is a basic precondition for trouble-free vehicle diagnostics. The mega macs PC SE
software provides assistance to simplify the selection, e.g. indicating the installation position of the diagnostic connector
or vehicle identification by VIN.
The following ECU functions are possible in the >Diagnostics< menu:
• Trouble code reading
• Parameter readout
• Actuator test
• Service reset
• Basic setting
• Coding
• Test function
Proceed as follows to prepare vehicle diagnostics:
1. Insert the Bluetooth® adapter into the USB port of the PC.
2. Start the mega macs PC SE software.
3. Perform steps 1 to 11 as described in section Vehicle selection.
mega macs PC SE
Working with the mega macs PC SE | 11.
181