Hella Gutmann mega macs PC SE Manual De Instrucciones página 196

11. | Working with the mega macs PC SE
12. Confirm the performed basic setting with
11.5.6.3. Performing Automatic Basic Settings
WARNING
Wrong or incorrectly performed basic settings
Risk of injury or material damage to vehicles
Regard the following when performing basic settings:
- Select the correct vehicle type.
- Regard the window with information and instructions.
Proceed as follows to perform the automatic basic setting:
1. Perform steps 1 to 11 as described in section Vehicle selection.
CAUTION!
Pulling off of the HG-VCI PC when actuating the clutch
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
NOTICE
Danger of short circuit and voltage peaks when connecting the HG-VCI PC
Danger of destruction of automotive electronics
Switch off ignition before connecting the HG-VCI PC to the vehicle.
2. Connect the HG-VCI PC to the vehicle's diagnostic connection.
ð Both LEDs of the HG-VCI PC flash.
ð The HG-VCI PC is ready for operation.
3. Select Diagnostics > Function > Basic settings.
196
.
Hella Gutmann
mega macs PC SE