Hella Gutmann mega macs PC SE Manual De Instrucciones página 153

Hella Gutmann
NOTICE
In the course of vehicle diagnostics the demo mode must be switched off. Otherwise the device will deliver
predetermined diagnostic results and no real values.
Proceed as follows to set the demo mode:
1. Select Settings > Miscellaneous.
2. Select >Miscellaneous<.
3. Open the list under Demo mode with
4. Select >on< or >off<.
ð Demo mode is switched off or on.
10.6.1.2. Setting Tips
Here you can activate or deactivate additional information on different functions.
Proceed as follows to set the indication of tips:
1. Select Settings > Miscellaneous.
2. Select >Miscellaneous<.
3. Open the list under Tips with
4. Select >on< or >off<.
ð Tips are switched off or on. The selection will be saved automatically.
10.6.1.3. Configuring Order Management
Here you can set the data exchange between the mega macs PC SE software and the order management.
Proceed as follows to set the order management:
1. Select Settings > Miscellaneous.
2. Select >Miscellaneous<.
3. Open a list under Order management with
4. Select >on< or >off<.
ð Order management is switched off or on. The selection will be saved automatically.
10.6.1.4. Performing a Factory Reset
Here you can reset the mega macs PC SE software to factory settings.
The following data and files will be reset to the state of delivery if you do the factory reset:
• Data stored in the Car History
• Downloaded files such as wiring diagrams or service schedules
mega macs PC SE
.
.
.
Configuring the mega macs PC SE | 10.
153