MAHLE X30 Manual De Usuario página 10

Long or short presses on the shifts enable different com-
mands to be sent to the system and a maximum of 2
e-Shifters can be installed per e-Bike (left and right).
The e-Shifters give haptic feedback to the rider by vibrat-
ing (under patent) every time the state of the system is
changed so as not to divert attention from riding.
The use of these electronic shifters can help to increase
riding safety by avoiding taking your hand off the handle-
bars. In addition, the vibration provides additional informa-
tion to the rider when the APP or e-Bike system changes
status or reports an alert.
To upgrade the e-Shifters on your X30 equipped bike,
please contact your local dealer to ensure proper instal-
lation and connection to the X30 system. The following
configurations are therefore available:
720 e-Shifters
SKU: 35010000000200
Box + Y-Joint + 2 e-Shifters with 720 mm cable + 2 sili-
cone bands + manual.
970 e-Shifters
SKU: 35010000000300
Box + Y-Joint + 2 e-Shifters with 970 mm cable + 2 sili-
cone bands + manual.
2.2.2.1. Installation of e-Shifters
Installation is possible on various areas of the handlebars
and in different ways. In addition, the included rubber
covers can be used for installation, but without them, the
shifters can be installed under the handlebar tape on road
handlebars.
The ergonomic design of the e-Shifters and rubber covers
enables them to be perfectly positioned and easily acces-
sible.
2.2.3. Duo
Two-button wired control handlebar-mounted control unit.
It enables the easy change the level of assistance, con-
trolling the lights and activating the walk mode. Installation
is optional and can be done on both sides of the handlebar.
Duo
SKU: 36000000000001
•
For 22.2 mm handlebars.
•
Dimensions 19 x 43.6 mm.
•
Weight: 40 g.
011