MAHLE X30 Manual De Usuario página 18

Error in the loading process.
If a critical error occurs during charging, the LED in the
charger will flash red.
3.5. Lights
The MAHLE X30 system can supply power to a lighting
system (optional). Ensure that the lights used are compati-
ble and that you use a MAHLE-compatible remote to acti-
vate and deactivate the lights system.
There are 3 modes to control the lights:
•
Automatic mode: using the ambient light sensor
and according to the ambient conditions, the main
unit will automatically activate/deactivate the lights.
•
Always on mode: the lights will remain on whenever
the bike is switched on.
•
Manual mode: the user can take control of the
activation of the lights at any time, either via the
ANT+LEV screen or using the electronic gear chang-
es if these are installed.
NOTICE
You can change the operating mode of the e-bike via the
My SmartBike mobile app or by visiting an authorised
MAHLE SmartBike Systems dealer.
Turning the lights on manually
Push and hold the left button on the electronic gear change
system or display to turn the lights on. You will see a "lights
on" graphic light up in yellow. Next, the LED bar will show
the battery level again.
Turning the lights off manually
Push and hold the left button of the electronic gear change
system or display to turn the lights off again. You will see
a "lights off" graphic in the LED bar. If everything is correct,
the LED bar will show the battery level again.
3.6. Update process
Whenever there is an update available, you will be able to
update the system through the My SmartBike application
in just a few simple steps. Please see this website for more
information:
mahle-smartbike.com/activecharger/
019