Service Points; Hose Clamp Removal; Hose Clamp Installation; Fuel Hose Disconnection - Yamaha WaveRunner GP1300R Manual De Servicio

FUEL
1
2
FUEL INJECTION SYSTEM
a

SERVICE POINTS

Hose clamp removal

1. Remove:
• Hose clamps
CAUTION:
If the hose clamps are removed without
cutting the crimp first, the fuel hose can be
damaged.

Hose clamp installation

1. Install:
• Hose clamps
WARNING
Do not reuse the hose clamps, always
replace them with new ones.
NOTE:
Crimp the hose clamps properly to securely
fasten them.

Fuel hose disconnection

WARNING
Before disconnecting
remove the fuel tank filler cap to reduce
any pressure inside the fuel tank, and then
disconnect the negative battery lead to cut
off the electric current to the electrical sys-
tems.
1. Wrap the quick connector with a cloth, and
then rotate the quick connector tab 1 to
the stopper position a.
WARNING
If the quick connector is removed sud-
denly, pressurized fuel can spray out. To
gradually release the fuel pressure, be sure
to remove the quick connector slowly.
4-18
E
the fuel hoses,