Fuel Injector Inspection; Throttle Body Inspection - Yamaha WaveRunner GP1300R Manual De Servicio

FUEL
FUEL INJECTION SYSTEM

Fuel injector inspection

CAUTION:
The throttle bodies should not be disas-
sembled unnecessarily.
1. Check:
• Fuel injector
Dirt/residue → Clean.
Damage → Replace.
2. Measure:
• Fuel injector resistance
Out of specification → Replace.
Digital multimeter:
YU-34899-A
Digital circuit tester:
90890-03174
Fuel injector resistance
(reference data):
13.8 Ω at 21 °C (70 °F)
3. Check the operation of the fuel injector
using the "Stationary Test" of the Yamaha
Diagnostic System.

Throttle body inspection

1. Check:
• Throttle body
Cracks/damage → Replace the throttle
bodies.
2. Check:
• Fuel passages
Obstruction → Clean.
Checking steps:
• Wash the throttle body in a petroleum
based solvent.
Do not use any caustic carburetor clean-
ing solution.
• Blow out all of passages with com-
pressed air.
4-20
E