POWR
GENERATOR AND STARTER MOTOR
SERVICE POINTS
Drive coupling removal and installation
1. Remove:
• Drive coupling
Coupler wrench:
YW-06551/90890-06551
Flywheel holder:
YW-06550/90890-06550
Drive coupling:
36 N • m (3.6 kgf • m, 25 ft • lb)
LOCTITE 572
NOTE:
Install the drive coupling with the same special
service tools that were used for removal.
Flywheel magneto removal and installation
1. Remove:
• Flywheel magneto bolt
Flywheel holder:
YW-06550/90890-06550
Flywheel magneto bolt:
74 N • m (7.4 kgf • m, 53 ft • lb)
NOTE:
Install the bolt with the same special service
tool that was used for removal.
5-45
E