Operating The Device - B.Braun Aesculap Nelson Deluxe Instrucciones De Manejo

High frequency surgical device
Press the function key 6.
The menu User Settings is displayed:
Change the setting selected by actuating function keys
shown on the display.
Confirm the setting by pressing the function key
to the main menu.
- or -
To exit the menu without adopting the changes:
Press the function key or wait for 30 seconds.
(GN 640)

4.2 Operating the device

Selecting and de-selecting HF outputs
14, as
The HF outputs of bipolar 1 and 2 as well as monopolar 1 and 2 modes
can be selected and de-selected at will in accordance with application.
and return
To select and de-select HF outputs: Press the corresponding func-
tion key
The menu card of HF output that can be operated is displayed, un-
derlaid in gray.
The functions of function keys
menu card.
Set function parameters such as Dosage setting, operational mode
and activation mode, using function keys
Selecting CUT/COAG mode
Various operational modes can be selected for each output that is ac-
tivated.
Available operational modes CUT:
• Monopolar output:
– MICROCUT 1—2
– POWERCUT 1—4
– SEALCUT
• Bipolar output:
– BICUT 1
– BICUT 2
Available operational modes COAG:
• Monopolar output:
– SOFTCOAG
– CONTACTCOAG
– FORCEDCOAG
– SPRAYCOAG
• Bipolar output:
– BICOAG
3, 4, 5, 6.
14 are allocated to the gray
14.
43