Magnetic Smartkey - Nilfisk Liberty SC50 Instrucciones De Uso

6/2020

MAGNETIC SMARTKEY™

The use of a Magnetic SmartKey™ (Z) is required to operate this machine. Pressing the power switch without a key in place on the SmartKey
Reader (A) will cause the machine to momentarily turn on and display Key Indicator (X19) before turning off.
a. The key is required at machine startup. If the operator steps off the machine and removes the key, it must be placed back on the reader
before machine operation is allowed.
b. The key can be removed at any time after initial machine start up, but must be removed from the reader before autonomous playback can
begin.
There are two different Magnetic SmartKeys (Z).
1. The "User" (blue) key allows a basic level of access to the information menu (press Information Switch (Y)).
2. The "Supervisor" (yellow) key allows an additional level of access.
NOTE: Use the yellow "Supervisor" key during initial machine set up. By default the blue "User" key doesn't have access to add/
delete Location tags or record/delete plans.
3. Additional access is available as a "Technician". The service menu allows observing operational and user parameters. The
configuration menu allows adjusting machine settings. See Service Manual for more details.
FIGURE 2-3
A
Z
12/2017
INSTRUCTIONS FOR USE
X19
56091204 - Nilfisk Liberty SC50
ENGLISH - A
Y
A - 25