Parts And Service; Modifications; Name Plate; Uncrate The Machine - Nilfisk Liberty SC50 Instrucciones De Uso

6/2020

PARTS AND SERVICE

Repairs, when required, should be performed by Nilfisk A/S, who employs factory trained service personnel, and maintains an inventory of Nilfisk
original replacement parts and accessories.
Call NILFISK A/S for repair parts or service. Please specify the Model and Serial Number when discussing your machine.

MODIFICATIONS

Modifications and additions to the cleaning machine which affect capacity and safe operation shall not be performed by the customer or user
without prior written approval from Nilfisk A/S. Unapproved modifications will void the machine warranty and make the customer liable for any
resulting accidents.

NAME PLATE

The Model Number (also known as Part Number) and Serial Number of your machine are shown on the Nameplate, located on the inside of the
battery compartment.
Date of Manufacture "Date Code" is marked on the nameplate. Date Code: A18, means January 2018.
This information is needed when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your
machine for future reference.
MODEL NO. ___________________________________________________________
SERIAL NO. ___________________________________________________________

UNCRATE THE MACHINE

When the machine is delivered, carefully inspect the shipping packaging and the machine for damage. If damage is evident, save the shipping
carton (if applicable) so that it can be inspected. Contact the Nilfisk Customer Service Department immediately to file a freight damage claim.
Refer to the unpacking instruction sheet included with the machine to remove the machine from the pallet.

TRANSPORTING THE MACHINE

CAUTION!
Before transporting the machine on an open truck or trailer, make sure that . . .
•
All tanks are empty.
• Recovery tank cover is latched securely.
• The machine is tied down securely - see Tie Down Locations (6) in Know Your Machine. Only use locations designated as "Tie Down
Locations" to secure the machine during transport. Using any other location of the machine to tie down the machine may cause damage or
injury.
•
The machine's electromagnetic brake is engaged (not manually overridden), see Electromagnetic Brake section if necessary.
12/2017
INSTRUCTIONS FOR USE
56091204 - Nilfisk Liberty SC50
ENGLISH - A
A - 3