Nilfisk Liberty SC50 Instrucciones De Uso página 35

6/2020
STARTING THE MACHINE - CONTINUED
3 Place the Magnetic SmartKey (Z) onto the SmartKey
Reader (A). Press the Power Switch (B) to turn on the
machine.
4 At startup, the machine conducts a system self-test for
the Autonomous Operating Mode. This test takes about
70 seconds to complete. Display will indicate the system
is booting by showing Countdown Timer (X26) during the
startup sequence. If the autonomy system fails to boot up
the display will show message "Autonomy not responding.
Manual mode only." manual mode is available.
5 Once autonomy is ready the machine will begin actively
scanning for a location tag, display will show a moving "o"
(X35).
6 Drive the machine so the new location tag is within view of
the machine's 3-D vision sensor.
7 After location tag is scanned the moving "o" will be
replaced with the tag ID #.
8 Reference the Battery Condition Indicator (X3).
9 The Manual Operation Indicator (H) will be lit.
10 To transport the machine to the work area, first push the
Forward Drive Switch (Q) or Reverse Drive Switch (R) to
select the direction of travel and then apply pressure with
your foot on the Go Pedal (24). An audible alert from the
speaker will sound in reverse.
NOTE: Stepping off of the Operator's Presence Pedal (25)
for more than 2 seconds will cause the Forward or Reverse
Drive Switch Indicator to turn off. The operator will need to
select forward or reverse again before the machine can be
driven.
11 Adjust machine speed by rotating the Speed Adjustment
Knob (P) clockwise to go faster or counterclockwise to go
slower.
NOTE: While the machine is operating in autonomous
mode the machine's speed is set by the computer and not
adjustable by using the speed adjustment knob.
12/2017
INSTRUCTIONS FOR USE
MACHINE READY
For autonomous
cleaning, drive to
location tag
menu, ff scrub on
MACHINE READY
For autonomous
cleaning, drive to
location tag
menu, ff scrub on
MACHINE READY
To play back or
record plan, drive to
start point.
$ menu, £ record
CB1 CB2 CB3
K1
5A 5A 15A
56091204 - Nilfisk Liberty SC50
D
B
Z
A
35
ENGLISH - A
T V
S1
X26
24
X35
25
26
X3
P
Q
R
A - 35