Menu Level - Nilfisk Liberty SC50 Instrucciones De Uso

6/2020
INFORMATION MENU DISPLAY – CONTINUED
Menu visible only with yellow (Supervisor) SmartKey.
1 2
Options
Obstacle Color
Detergent Low
Detergent High
Detergent shown as
Neutral Delay (s)
Vac Off Delay (s)
Burst Of Power (s)
Fwd Speed Max (%)
Record Speed Max (%)
Inactive Time (min)
User
Delete ALL PLANS?
Delete ALL TAGS?
Ignore water meter?
*Default setting
12/2017

Menu Level

3
Orange*
Red
(300,256,200,150,128,100,64,50,32,26):1
– ratio cannot be > Detergent High
(0.3, 0.4, 0.5, 0.7, 0.8, 1.0, 1.5, 2.0, 3.0, 3.8)%
– percentage cannot be > Detergent High
(300,256,200,150,128,100,64,50,32,26):1
– ratio cannot be < Detergent Low
(0.3, 0.4, 0.5, 0.7, 0.8, 1.0, 1.5, 2.0, 3.0, 3.8)%
– percentage cannot be < Detergent Low
xxx:1
x.x%
min = 0.5*
max = 5.0
step = 0.5
min = 15*
max = 25
step = 1
min = 60*
max = 300
step = 60
min = 50%
max = 100%*
step = 10
min = 50%
max = 100%*
step = 10
min = 5
max = 60
step = 5
default = 15
Replay Only*
Replay/Record
Replay/Record/Delete
No Add/Delete Tags*
Add Tags
Add/Delete Tags
No*
Yes
No*
Yes
No*
Yes
INSTRUCTIONS FOR USE
Supervisor selectable options
Color of "Obstacle" chasing lights displayed on
LED status bar when an obstacle is encountered
Set detergent ratio for detergent low level
Set detergent ratio for detergent high level
Ratio or percentage
Time to keep brushes on when in neutral
(seconds)
Time to keep vacuum on after turning off scrub
system (seconds)
Burst-of-power (BOP) time span (seconds)
Maximum forward speed as percentage of
maximum available speed in manual mode
Maximum forward speed allowed while recording
(as percentage of maximum available speed in
manual mode)
Inactivity time before putting machine in sleep
mode (minutes)
User key plan permissions -- only replay; replay
and record; replay, record, and delete plans
User key location tag permissions -- no
permissions, can add tags, can add and delete
tags
Deletes all plans
Delete all tags (and plans)
Ignore water meter and do constant flow with no
feedback loop. Allows operator to keep cleaning in
autonomous or manual mode with a broken flow
meter.
56091204 - Nilfisk Liberty SC50
ENGLISH - A
Notes
A - 17