SURE petcare SureFlap Manual Del Usuario página 11

2. Red flashing ears
If both the ears on your Hub are flashing red it means it has lost connection with a Pet Door.
• If you are seeing both ears flashing red during set up, please perform a factory reset by
pressing the button on the base of your Hub for 10 seconds.
• If you are seeing both ears flashing red for prolonged periods after setup, try power cycling your
Hub. Switch the power off at the socket, leave it for 30 seconds, and then turn it back on.
• Also try moving your Hub closer to the Pet Door. See point 1. of Connection issues for details.
If your connection problems persist, please contact the Sure Petcare Customer Care team
(see back cover for details).
Slow notifications
If you find some messages are slow to appear on your app, this is likely because your Hub is having
to work hard to connect to your Pet Door. To improve the speed of messages, try moving your Hub
to a better location. Go to surepetcare.com/hub-connectivity for more info.
Alternating flashing ears
If the ears on your Hub keep continuously alternating red or green, it means it is having problems
connecting to the Sure Petcare servers. This could be because it doesn't have a reliable internet
connection.
• Try power cycling your Hub by switching the power off at the socket, leaving it for 30 seconds,
and then turning it back on. At this point you will see the setup light sequence (see page 9).
If the ears remain solid green for a few minutes, the Hub has reconnected.
• If the above doesn't work, make sure your internet router is turned on and that your internet
connection is working correctly with other devices.
• If it isn't working with other devices, try switching your router off, leaving it for 30 seconds,
and then turning it back on.
• If your internet router is working with other devices, try re-connecting the Ethernet cable into
the router and the Hub. Make sure it is pushed in all the way, as it can easily appear connected
when it isn't.
If the problem persists, contact the Sure Petcare Customer Care team (see back cover for details).
Solid red ears
If the ears on your Hub are solid red it means your Hub is undergoing a firmware update.
• Be patient and wait for the Hub ears to turn green. This shouldn't take longer than 2 minutes.
• Once the firmware update is complete the Hub will need to reboot. At this point you will see
the setup light sequence (see page 9).
• If the red lights persist, or the Hub keeps rebooting, please contact the Sure Petcare Customer
Care team (see back cover for details).
If you're having issues with your Pet Door please see Help & support - Pet Door on page 28.
If you're having issues with your Sure Petcare app please visit: surepetcare.com/apphelp.
Still in need of assistance?
For more detailed guidance, videos and customer help forums visit: surepetcare.com/support.
Alternatively contact our friendly Customer Care team: see back cover for details.
EN
10