Bartscher 162913 Manual De Uso Y Mantenimento página 31


Do not lay the cable over carpets or heat insulations. Do not
cover the cable. Keep away the cable from operating range
and do not dunk it into water.

Inspect the power cable regularly for damage. Never use the
device if the cable is damaged. If the power cable is damaged,
have an authorised service center or qualified electrician
replace it.

The supply cable must be disconnected from the socket
only by pulling the plug.

Never carry or lift the device by the supply cable.

In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.

Do not use any acid agents and make sure no water ingresses
the device.

Never operate the device with moist hands or standing on wet
floor.

Disconnect the device from the power supply:
- when the device is not used,
- in case of anomalies during operation,
- before cleaning.
HOT SURFACE! Burn hazard!
To avoid the effects of this risk, follow the safety instructions
presented below.

During the operation the surface of the device is very hot!
To avoid burns to the hands and fingers, do not touch the hot
surface of the device! Operate the device only using the
designated handles and switches.
- 27 -