Descargar Imprimir esta página

Check Latch Position(S) - Schlage LM9200 Serie Instrucciones De Instalación

Publicidad

13c
THUMBTURN FUNCTIONS ONLY: Install thumbturn
assembly.
Make sure the lock is unlocked.
Insert the thumbturn with the turn vertical.
Escutcheon trim
Turn vertical
Rose trim
Turn
vertical
Rose trim only: Rotate the turn 90° to horizontal position and
secure the thumbturn with two screws.
13d
ALL FUNCTIONS: Tighten the interior lever bushing
with spanner wrench.
14

Check latch position(s)

14a
Remove tape from bottom latch (2-point latch only).
14b
Check bottom latchbolt position (2-point latch only).
The latches should be released.
Bolt
Strike
14c
Check bottom latch function (2-point latch only).
Confirm bottom latchbolt does not drag against floor when door
is opened.
With door closed, bottom latch should be secure.
The bolt should just
clear the top of the
strike.
16

Publicidad

Capítulos

loading