Publicidad
14d
Rotate the lever to release the latch(es).
Check that the top latch (and bottom latch, if applicable) is in the
released position.
14e
If necessary, adjust the latch(es).
For 1-point latch refer to steps 6d and 6e on page 9.
For 2-point latch refer to step 7 on page 9 and page 10.
15
Complete top strike installation
Adjust top strike as necessary, then install the third strike screw to
fix the strike position.
Metal
Wood
Customer Service
1-877-671-7011
Wood
Z\," drill
Pilot 1" deep
Metal
#25 x C\v" deep
#10-24
www.allegion.com/us
© Allegion 2020
Printed in U.S.A.
P516-955 Rev. 06/20-d
Publicidad
Capítulos
