Scope Of Delivery; Transportation And Storage - Wilo Flumen OPTI-TR 20-1 Instrucciones De Instalación Y Funcionamiento

4.7 Type key
4.8

Scope of delivery

4.9 Accessories
5

Transportation and storage

5.1 Delivery
Installation and operating instructions Wilo-Flumen OPTI-TR 20-1, 28-1, 30-1, 40-1 Wilo-Flumen EXCEL-TRE 20, 30, 40
Transportation and storage
Rating plate Value
designation
Frequency
f
Motor efficiency
Cos φ
Service factor
SF
Operating mode: immersed
OT
S
Operating mode: non-immersed
OT
E
Starting mode
AT
Weight
m
*The date of manufacture is stated in accordance with ISO 8601: JJJJWww
▪ JJJJ = year
▪ W = abbreviation for week
▪ ww = calendar week
Example: Wilo-Flumen OPTI-TR 30-1.145-4/16REx S17
Submersible mixer, horizontal
Flumen
Series:
OPTI OPTI = mixer with standard motor
EXCEL = mixer with high efficiency motors (IE3/IE4/IE5)
Mixer type:
TR = mixer with standard asynchronous motor
TR TRE = mixer with asynchronous motors of motor efficiency class IE3/IE4
TRP = mixer with permanent magnet motors of motor efficiency class
IE4/IE5
x10 = nominal propeller diameter in mm
30
Model
1
Rated propeller speed in rpm
145
Number of poles
4
x10 = stator pack length in mm
16
Motor version:
R R = mixer version
V = mixer version with reduced power
Ex-rated
Ex
Propeller code for special propeller (omitted for standard propeller)
S17
▪ Mixer with bare cable end
▪ Cable length as per customer request
▪ Mounted accessories, e.g. frame, pencil electrode, etc.
▪ Installation and operating instructions
▪ Lowering device
▪ Auxiliary lifting device
▪ Mounting bracket for wall and floor fixation
▪ Cable bollard to secure the hoist cable
▪ Terminal stop
▪ Additional rope anchoring
▪ Fixation sets with anchor bolts
After receiving the shipment, this must be checked immediately for defects (damage,
completeness). Defects must be noted on the freight documentation! Furthermore, de-
fects must be notified to the transport company or the manufacturer immediately on
the day of receipt of shipment. Subsequently notified defects can no longer be asser-
ted.
en
287