Uline OHAUS RANGER 7000 Manual Del Usuario página 20

THE DYNAMIC HOME SCREEN
NOTE: Press the
explanation.
Application Setup
The Application can be customized for various user
preferences. Press the button corresponding to the
icon to enter Application Setup. (See Figure 57)
Figure 57
The Configuration Menu is now displayed. (See FIgure 58)
Figure 58
Select the list item and press the button corresponding
to to change the setting as desired. To return
to the Application home screen, press the button
corresponding to
The Dynamic Configurations are defined below (defaults
in bold).
ITEM AVAILABLE SETTINGS
Manual, Semi-Automatic,
Dynamic Mode
Automatic
Auto Tare On, Off
Chain Tare On, Off
Accumulate Off, Automatic, Manual
Duration 1...10 S
PAGE 20 OF 105
OPERATION CONTINUED
Main Display Line
Reference Fields
Functions
button for button icon
i
.
COMMENTS
To set the Mode
To enable Automatic Tare
To enable Chain
(Continuous) Tare
To enable Accumulation/
Totalization
Set the duration time in
seconds
Average Time Setup
Press the button corresponding to the
enter the Edit Average Time screen. (See Figure 59)
Figure 59
The Edit Average Time screen is now displayed.
(See Figure 60)
Figure 60
Enter the Average Time by using the alphanumeric
keypad and press the button corresponding to
the icon to save the value and return to the
Application home screen.
The default Average Time is 10s.
NOTE: When the time is set to 0, the first stable
weight over 5d will be displayed. Averaging
time can be set to a value between 0 and 60.
Input/Output (I/O) Setup
The I/O's can be customized for various user preferences.
The I/O's are defined below (defaults in bold).
ITEM
Discrete Input 1 Off, Zero, Tare, Clear Tare, Print, Start, Reset
Discrete Input 2 Off, Zero, Tare, Clear Tare, Print, Start, Reset
Discrete Output 1 Off, Underload, Overload
Discrete Output 2 Off, Underload, Overload
Discrete Output 3 Off, Underload, Overload
Discrete Output 4 Off, Underload, Overload
icon to
AVAILABLE SETTINGS
0721 IH-7991