Uline OHAUS RANGER 7000 Manual Del Usuario página 22

Select the list item and press the button corresponding
to to change the setting as desired.
To return to the Application home screen, press the
button corresponding to
The Density Determination Configurations are defined
below (defaults in bold).
ITEM AVAILABLE SETTINGS
Liquid Type Water, Other*
Temperature
ºC, ºF
Type
* Other liquids that are not water.
Water Temperature / Liquid Density Setup
To set the water temperature or Liquid density (liquids
other than water), please follow the instructions below.
Liquid Type: Water
Press the button corresponding to the
enter the Enter Water Temp. screen. (See Figure 66)
Figure 66
The Enter Water Temp. screen is now displayed.
(See Figure 67)
Figure 67
Enter the water temperature by using the alphanumeric
keypad and press the button corresponding to the
icon to save the value and return to the previous
screen.
PAGE 22 OF 105
OPERATION CONTINUED
.
COMMENTS
To set the Liquid Type
To set the Temperature Type
icon to
Liquid Type: Other
Press the button corresponding to the
enter the Enter Liquid Density screen. (See Figure 68)
Figure 68
The Enter Liquid Density screen is now displayed.
(See Figure 69)
Figure 69
Enter the liquid density by using the alphanumeric
keypad and press the button corresponding to the
icon to save the value and return to the previous
screen.
DIFFERENTIAL WEIGHING
Differential weighing stores weight values of the samples.
The samples can then be dried or processed and the
difference in weight calculated. Up to 20 samples can
be stored.
Press the button until Differential is displayed in the
upper left portion of the home screen.
THE DIFFERENTIAL HOME SCREEN
NOTE: Press the
explanation.
icon to
Main Display Line
Reference Fields
Functions
button for button icon
i
0721 IH-7991