Uline OHAUS RANGER 7000 Manual Del Usuario página 26

To print the sieve result, press the button corresponding
to the icon or the
To return to the main screen, press the button
corresponding to the
LIBRARY
When an item is processed on a regular basis, the item's data may be stored in memory for future use.
This memory is referred to as the scale's Library.
The following data is stored for the application used:
PN
APPLICATION
PART NUMBER
Weighing X
Counting X
Percent
Check X
Dynamic
Filling X
Formulation X
Differential
Density
Sieve
NOTE: Maximum length of PN and Name is 30 characters. For the Formulation Library, each record can
store up to 100 components. For the Sieve library, each record can store up to 10 sizes.
CREATING A LIBRARY RECORD
1. To create a library record, press the library button
. The requested data records will appear
according to the active application mode (see Sieve
Weighing on page 23 ). In this example the Weighing
Library screen is now displayed. (See Figure 86)
Figure 86
2. To return to the previous screen press the library
button again.
3. To add a library record, press the button
corresponding to the
PAGE 26 OF 105
OPERATION CONTINUED
button.
icon.
PRESET
NAME APW
TARE
X X
X X
N/A
X X
N/A
X X
X X
N/A
N/A
X
icon.
NOTE: Print template Custom 5 is set as default
template for sieve weighing.
REF./TARGET CHECK
WEIGHT LIMITS
X
X X
X
X
The New Library Item screen is displayed (See Figure 87)
Figure 87
4. Press the button corresponding to the
to enter PN by using the alphanumeric keypad.
5. Press the button corresponding to the
again to save the barcode.
6. Repeat the process to enter name, tare weight and
other values by using the button corresponding to
to move down in the list.
7. Press the button corresponding to the
go back to Library List screen.
SP SIEVE SIZE
SET POINTS CALCULATE FM
X
X
MAX
RECORDS
2,000
2,000
X
2,000
X
2,000
30
X
X
30
icon
icon
icon to
0721 IH-7991